These are recent pictures of just interior and stereo.
June 2003

Old - Blitz SBCiD moved - see below:

Modifications I've made

  • HKS Turbo Timer-Type 1
  • Hi-Flow Air Cleaner system (K&N)
  • Active Radar Jammer
  • Active Aero auto mode rewire(remove speed controlled system)
  • Stillen Brake Pads & upgrades
  • Stainless Steel Brake Lines
  • Custom Spark Plug Cover, polished/powder coated
  • Aluminum Mesh Grilles - radiator and intercooler protection
  • Blitz DSBC i-D 2 Electroniz Boost Controller
  • Blitz Power Meter (with DSBC iD 2)
  • HKS S-AFR Fuel Controller
  • HKS Injector Pulse Monitor
  • HKS Circle-the-Earth Grounding system
  • Defi HUD System
  • Reverse Indiglo gauges
  • Iridium Spark Plugs
  • Accel HiPerf Wires
  • Clear Corner Lenses
  • Optima Battery
  • Full Silicone Hose Replacements
  • Hi-Flow Cat Converter (Random Tech.) removed
  • Trust ( Greddy ) Front and Rear strut bars
  • Polished Plug Cover and Plenum Cover
  • HID Headlights system
  • 3 gauge full A-Pillar pod
  • Added Meters - A/F, Boost, Volts, Oil Temp, EGT
  • T Hose Clamps , covers
  • PIAA Silicone Wiper blades
  • Plasma Foglight 85w bulbs
  • HKS Turbo Twin Exhaust Twin Tip system
  • Stillen DownPipe
  • Walbro 255 Fuel Pump
  • Polished VR4 Door Sills
  • Door Sill Decals (Carbon Fiber & Scotchlite)
  • SS. Short Shifter
  • Simoni Italian Shift knob w/ leather boot
  • Cold Air Intake (to cool rear turbo/underhood temps)
  • Pre-Cats removed (front) , rear gutted.
  • Polished Fuesbox Cover & Injector wiring cover
  • Greddy Oil Catch Can
  • Re-Tint Windows
  • MOMO Racing Pedals
  • Kenwood KDC-X869 CD/Receiver Unit
  • Kenwood "KEG" MP3 Hard Drive Storage - 20GB
  • Alpine ERA-G320 EQ & Sound Processor
  • MTX 8000 10" subwoofers (2) + custom enclosure
  • MTX 6532 Speakers
  • MTX 900W 4 channel Amplifier
  • MTX Subwoofer Amplifier 450W
  • MTX CROSSOVER RT-X02A
  • X-Static BatCap 400 amps
  • Infinity Kappa Speakers 60.5 door and tweeters
  • Infinity Kappa Speakers 63.5 three way
  • DynaMat installed in flooring for soundproofing
  • All lube Fluids - Red Line Oil
  • And a bunch of other little stuff too :)

SEE NEW (2004) MTX Sub-Woofer Install and Amps Install - CLICK HERE

METER COLOR CONTROLLERS
These are the color controllers for each meter

Another pic (a little blurry)

 

 

DEFI HUD in the left side. Hard to see in this pic.
Meters shown are no longer in the pod.
NEW OMORI Meters! SEE BELOW!

 

OMORI METER CO. 2003 Models
(Omori is a mfg. and makes the meters for kks, greddy, etc)
These meters each have a R/G/B controller so you can adjust to
and ENDLESS possible color backlighting.

 

GAUGES: NIGHT PICS HERE

 

I put the controls for the DEFI HUD, The HKS TT and the SubBass Ext. Control where I can easily reach them (just below the emerg. brake on left side of shift tower. I run auto on TT so many times I also want to be able to easily reach it. The Bass control being there is very handy too. Easy place to mount, not a lot to fab. andthe fits is good.

 

 

The dash changed to make room for the Alpine Sound Processor. The Blitz DSBoost Controller moved to the top/roof area.

I ran the Blitz wires down the RIGHT A-Pillar and under the glovebox. Rather than move the controller boxes closer I extended the wire harnes for the Blitz SBCiD and Pwr.Meter.

Will be changing the AL cover to a more polished look and also the lenses will be changed soon to look cooler :)

 

 

 

Shows most of the interior controls with new mount for Blitz SBC iD & pwr. meter up top
I didn't want to completely lose bullet light so I made the pod accomodate an LED bullet lite.


Shows DEFI HUD control, HKS TT, and Bass controls on lower left area of shift tower.
A very handy place to mount things actually. Very easy to reach!

 
  • HKS S-AFR Fuel Controller
  • HKS Injector Pulse Monitor
  • SS. Short Shifter
  • Simoni Italian Shift knob w/ leather boot
  • Kenwood KDC-X869 CD/Receiver Unit
  • Alpine ERA-G320 EQ & Sound Processor
  • HKS Temp 46mm Gauge

 

 

 


 

 

 

COMING SOON!!!!!!!!

I have the MTX Amplifiers, Digital Power Distribution center, Capacitor, Subs, Kenwood 20GB Keg that I'll be 're-mounting' using some carbon fiber overlays and smoke plexi-hinged covers with cooling fams. Subs will be in custom curve-around fiberglas enclosure!

Stay tuned - Stereo Pics coming as soon as I complete re-doing the install using the overlays and new modified installs.

 

NEW AMPS AND SUB INSTALLS FINISHED.
SEE PICTURES HERE

 

Thanks for visiting. Sorry I don't have time to lay this out better for you!
This is only a hobby :)